Custom Monument Signs for City of Greenacres, Florida — 80% Lighter EPS Construction with Heritage Design and 4x Faster Installation
The City of Greenacres, Florida needed new entrance monument signs that honored the city’s 1926 incorporation heritage, met strict Florida Building Code wind-load requirements, and could be installed quickly without heavy cranes or road closures.
We delivered a complete set of lightweight EPS foam signs with polyurea coating, realistic brick veneer bases, raised lettering, and embossed tree relief — achieving historical accuracy, dramatic weight reduction, and rapid on-site installation.
Location: Greenacres, Florida
Industry: Municipal / City Government
Product System: Monument Entrance Signs (2 designs)
Materials: EPS Foam Core + Polyurea Coating
Timeline: 28 days from design approval to delivery
PROJECT OVERVIEW
- Client: City of Greenacres, Florida (municipal public works department)
- Location of use: Primary city entrances and public spaces
- Project scale: 7 custom monument signs (tall vertical pillars and wide horizontal arched monuments)
Solution
Precision CNC-fabricated EPS foam signs with integrated brick veneer bases, 3D raised lettering, embossed tree graphics, and full polyurea protective coating — reproducing the historic 1926 aesthetic while delivering modern performance and installation speed.
THE CHALLENGE
The city required signs that precisely matched the original 1926 heritage design while complying with current Florida Building Code requirements and high wind-load standards in a hurricane-prone environment.
Traditional concrete or masonry signs would have been extremely heavy, expensive to transport, and would require cranes and extended road closures during installation.
Municipal budget and timeline constraints were tight. The project needed to be completed without lengthy permitting delays or heavy-equipment logistics.
The signs also had to withstand Florida’s intense UV exposure, humidity, and salt air without cracking, fading, or requiring frequent maintenance.
Historical accuracy was essential. Raised lettering, tree relief, and brick texture had to be reproduced exactly.
THE SOLUTION
Material System
- EPS Core Density: 2.0 lb/ft³
- Polyurea Coating: 60–80 mil thickness
- Finish: Textured polyurea with UV-stable architectural paint in heritage green, brown, and brick tones
Structural System
- Internal fiberglass mesh reinforcement
- Embedded steel anchor plates for direct foundation bolting
- Engineered for 140 mph wind loads in compliance with the Florida Building Code
Fabrication
- CNC hot-wire cutting for EPS core
- 5-axis CNC routing for precise 3D lettering and tree relief
- Modular shop assembly with seamless polyurea application
Customization
- Exact dimensions based on provided CAD drawings
- 96″ height for pillars
- 96″ width for arches
- Fully raised 3D “CITY OF GREENACRES” lettering
- Embossed tree graphic matching the 1926 design
- Integrated realistic brick veneer base
SYSTEM ARCHITECTURE (Layer Breakdown)
- Structural EPS foam core (2.0 lb/ft³)
- Fiberglass mesh with embedded steel anchors
- 60–80 mil polyurea coating
- Textured finish layer with brick veneer base
- UV-protective topcoat system
This layered system delivers monument-level aesthetics at one-fifth the weight of concrete while exceeding code requirements.
BEFORE / AFTER COMPARISON
Before: Conceptual CAD drawings only.
After: Fully fabricated, finished, and ready-to-install monument signs matching the 1926 heritage design exactly.
IMPLEMENTATION PROCESS
Design — 5 Days
- 3D modeling
- Client review
- Final CAD approval
Engineering — 4 Days
- Wind-load calculations
- Structural certification
- Florida Building Code compliance
Fabrication — 12 Days
- CNC cutting
- Assembly
- Polyurea coating
- Painting
- Brick base integration
Delivery — 2 Days
- Lightweight palletized shipment via standard trucking
Installation — 5 Days
- Small crew
- No crane required
- Signs bolted directly to pre-poured foundations
RESULTS
- 80% lighter than traditional concrete or masonry equivalents
- 4× faster installation with no crane or heavy equipment required
- Complete project delivered in 28 days
- 45% reduction in total installation cost
- Full compliance with 140 mph wind-load requirements
- Zero cracking risk due to flexible polyurea coating
- 10+ year expected service life with virtually no maintenance
VALUE ANALYSIS (TCO)
Traditional Concrete / Masonry vs. Royal Foam EPS + Polyurea
- Weight: Very heavy → 80% lighter
- Installation method: Requires crane → Small crew, no crane
- Project timeline: 6–8 weeks → 4 weeks
- Total installed cost: High → Significantly lower
- Maintenance: Frequent painting and repairs → Minimal to none
- Logistics and transport: Complex and expensive → Simple standard trucking
COMPLIANCE & ENGINEERING
- Florida Building Code compliant
- Engineered for 140 mph wind loads
- UV-resistant and moisture-proof polyurea system
- Closed-cell EPS with zero water absorption
- Non-corrosive materials throughout
- Fire rating: Class B
CLIENT FEEDBACK
“We needed signs that looked like classic brick and stone but without the enormous cost and installation headaches. Royal Foam delivered exactly what we envisioned — beautiful, durable, historically accurate monuments that went up quickly and cleanly.”
— Public Works Director, City of Greenacres, Florida
FAQ
How long does installation take?
Installation typically takes 4–5 days with a small crew and no crane.
Will the signs survive Florida hurricanes?
Yes. The signs are engineered and certified for 140 mph wind loads in accordance with the Florida Building Code.
What maintenance is required?
Virtually none. The polyurea coating provides long-term durability and typically lasts 10+ years without repainting.
Can you exactly match historic 1926 designs?
Yes. Our CNC fabrication process reproduces every detail, including lettering, relief, and dimensional features with high precision.
How much lighter are they than concrete?
Approximately 80% lighter, making transportation, handling, and installation significantly easier and more cost-effective.
Is this system suitable for other cities or HOAs?
Absolutely. The same lightweight, high-durability system is ideal for municipal, commercial, residential, and HOA entrance projects.
Read more

Industrial 3D Printing Case Study

Interactive 3D Mascots That Bring Brands to Life

Holiday & Seasonal Decor for Regency Centers

Custom EPS Molds for Architectural Stone Sign Production

Custom Floating Pool Letters for Wedding Celebrations

Premium Luxury Branding for Interior & Exterior Applications

Premium Interior Branding with Non-Illuminated, Halo-Lit & Back-Lit Options

Custom PVC Letters & Logo for Children’s Development Center

Custom HDU Sign Panel with Raised Lettering and Precision Color Matching for Institutional Branding

Large-Scale 3D “HELLO” Sculpture for Public Placemaking and Social Engagement

Oversized 3D Castle Environment Configurations for Casino Marketing Tiers

The Fusion of Color, Depth, and Illumination
Recommended Articles
Latest news and updates on our product range and special offers


























